*Remove the metal insert at the bottom before installation*

*Does not work with grip plug*

*Product will not be compatible with Glock 43X or 48 firearms*

– This base pad comes with a 10% stronger spring.

– Overall weight 1oz.

– Length, 1 inch front side, half Inch on back side.

– Patented proven push pin design.

– Easily attaches and detaches from the magazine.

– No specialty tools or devices required to disassemble.

– One piece design, no extra parts to possibly lose during disassembly.

– Designed specifically for the GLOCK 43.

– +2 Holds 8 +1 rounds in 9mm.

– CNC machined from billet aluminum.

– Hard Anodized.

– Made in the USA.

This Taran Tactical Innovations GLOCK base pad is designed for the GLOCK 43. This TTI base pad adds 2 extra rounds to the magazine. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazine. Just push down the pin, slide the base pad on and push the pin up to lock it onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

*Please Note : Fiber Optic does NOT come installed on the front sight*

– Made for double stack Glocks.

– 1/16 allen key.

-Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use. Take your pick between our standard height and our co-witness height!

-RMR Co-Witness option is for Glock slides that have gotten the RMR cut, like the one we provide. This is not for MOS Glock slides.

– POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

– The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

– The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it – Which can cause the shooter to shoot either too high or too low.

– The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

– Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

– As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.

– The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.

– All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.

Standard Height Specs

– The front sight is .230″ tall and .124″ wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

– The rear is .245″ tall. The tighter .125″ rear notch helps dramatically when shooting small steel and tight shots at a distance.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

– Made for double stack Glocks.

– 1/16 allen key.

-Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use. Take your pick between our standard height and our co-witness height!

-RMR Co-Witness option is for Glock slides that have gotten the RMR cut, like the one we provide. This is not for MOS Glock slides.

– POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

– The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

– The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it – Which can cause the shooter to shoot either too high or too low.

– The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

– Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

– As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.

– The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.

– All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.

Standard Height Specs

– The front sight is .230″ tall and .124″ wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

– The rear is .245″ tall. The tighter .125″ rear notch helps dramatically when shooting small steel and tight shots at a distance.

Quality CNC machined Recoil Spring Assembly for Glock Full Frame pistols

Completely assembled “drop-in” unit includes ISMI heat treated, shot peened and stress relieved premium chrome silicon springs. All guide rods are stainless steel and have a 100% lifetime warranty. Recoil springs have a one year replacement warranty. Both are made in America.

**GEN 4/5 GLOCKS WILL NEED A GEN 4/5 ADAPTER – SOLD SEPARATELY – PRODUCT LINK BELOW**

*Adapter*

*17/34 GEN 5 GUIDE RODS NOT AVAILABLE AT THIS TIME. PLEASE REFER TO OUR UNCAPTURED GUIDE RODS FOR AN ALTERNATIVE

*COMPLETE SIGHT SET WILL COME WITH FIBER OPTIC ROD OF CHOSEN COLOR. INDIVIDUAL COMPONENTS WILL NOT INCLUDE FIBER OPTIC.*

*Please note : Fiber Optic does NOT come installed on the front sight*

Replacement Fiber Optic – https://tarantacticalinnovations.com/replacement-fiber-optic-rod/

– The front sight is .225″ tall and .115″ wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

– Made for double stack Glocks.

– 1/16 allen key.

– POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

– The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

– The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it – Which can cause the shooter to shoot either too high or too low.

– The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

– Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

*Please Note : Fiber Optic does NOT come installed on the front sight*

Replacement Fiber Optic – https://tarantacticalinnovations.com/replacement-fiber-optic-rod/

– Made for double stack Glocks.

– 1/16 allen key.

-Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use. Take your pick between our standard height and our co-witness height!

-RMR Co-Witness option is for Glock slides that have gotten the RMR cut, like the one we provide. This is not for MOS Glock slides.

– POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

– The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

– The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it – Which can cause the shooter to shoot either too high or too low.

– The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

– Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

– As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.

– The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.

– All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.

Standard Height Specs

– The front sight is .230″ tall and .124″ wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

– The rear is .245″ tall. The tighter .125″ rear notch helps dramatically when shooting small steel and tight shots at a distance.

*Remove the metal insert at the bottom before installation*

*Does not work with grip plug*

– 10% stronger spring installed.

– Overall weight .7oz.

– Length, 1/2 inch.

– Patented proven push pin design.

– Easily attaches and detaches from the magazine.

– No specialty tools or devices required to disassemble.

– One piece design, no extra parts to possibly lose during disassembly.

– Designed specifically for the GLOCK 42.

– Holds 8+1 rounds in 380.

– CNC machined from billet aluminum.

– Hard Anodized.

– Made in the USA.

This Taran Tactical Innovations GLOCK base pad is designed for the GLOCK 42. This TTI base pad adds 2 extra round to the magazine. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazine. Just push down the pin, slide the base pad on and push the pin up to lock it onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

– Designed to operate with the stock magazine spring.

– Overall weight .4oz.

– Length 1/8th Inch.

– Patented proven push pin design.

– Super easy to attach and detach from the magazine.

– No specialty tools or devices required to disassemble.

– One piece design, no extra parts to possibly lose during disassembly.

– Designed specifically for the GLOCK 43.

– +1 Holds 7+1 rounds in 9mm.

– CNC machined from billet aluminum.

– Hard Anodized.

– Made in the USA.

This Taran Tactical Innovations GLOCK base pad is designed for the GLOCK 43. This TTI base pad add 1 extra round to the magazine and is only a 1/8th of an inch longer than the stock base pad. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazine. Just push down the pin, slide the base pad on and push the pin up to lock it onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Specifications and Features:
Taran Tactical Innovations GLKRS-TK04
Grand Master Connector Kit
Trigger pull weights reduced to approximately 3.5 – 4.5 LBs. Each firearm is slightly different
Lightest, smoothest, and cleanest trigger break you’ll ever put into your GLOCK
Top shooters from around the world attest to the superiority and competitive excellence brought by the Grand Master connector kit

Includes:
1x TTI Grand Master Connector
1x TTI Trigger Return Spring
1x TTI Firing Pin Safety Spring
1x TTI Firing Pin Spring
1x TTI Stainless Steel Rear Pin

Fits:
Glock 43. Glock 43x, 48 and 42

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. Components and parts that do not specifically have GLOCK listed as the manufacturer are made by their respective company. Such parts may be intended for use with GLOCK components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

PRODUCT DESCRIPTION

Lightning Aluminium Magazine Well for Glock Gen 4

Taran Tactical Innovations Lightning Magazine Well for Gen4 Glock provides the ultimate in reloading performance for your Glock pistol. CNC’d from high quality billet aluminium right here in America, our one-piece set screw design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a massive underside funnel increases the speed and success of quick reloads. 1.7 ounces of high quality Aluminum provides much needed weight for balance to your limited Glock.

– Aluminium 1.7oz of high quality craftsmanship to provide weight and help improve your reloads.
– One piece design removes the hassle of losing parts.
– Set screw increases the comfort of retention (Extra-Long Extended Point Set Screw, Alloy Steel, 10-32 Thread, 3/8″ Long).
– Massive funnel increases the accuracy of reloads.
– Fits the IPSC box.
– Underside cuts allow for retention and functionality with all current basepad extensions.
– Includes an Inch Hex L-Key Standard, 3/32″ Hex, 2″ Long.

** May require slight fitting on stippled Glocks. **

** Will not fit Glock 19. **

** Will not fit .45 caliber Glocks. **

** Will not work with any back-strap **