Enhanced features include a recessed target crown, a new match chamber, and a stylized barrel hood with caliber and model engravings and a loaded chamber indicator.

ZEV’s proprietary broach cut 1 in 14″ left hand twist rifling was developed to create the most accurate Glock aftermarket barrel available, and testing confirms a significant increase in accuracy over factory barrels in all standard bullet weights.

Manufactured from 416R stainless steel which is an ideal material for making match grade barrels because the material allows for the precise cutting of chambers and rifling which results in a more accurate barrel.

Available in Black and Bronze.

COMPATIBILITY
Glock 19 (1st – 3rd Gen)
Glock 19 (4th Gen)
Glock 19 (5th Gen)
Glock 19C (1st – 3rd Gen)

TECHNICAL SPECS
Match Grade drop in barrel
1-14″ twist rate
SAAMI spec. Match chambers

SPECS
US
Material – 416R Stainless
Finish – Black DLC
Twist Rate – 1-14″
Tolerance = +/- 0.003″

TECHNICAL SPECS:
-Drop-in installation
-Ergonomically correct trigger pad
-Available for most GLOCK models
-Mil-Spec hard-anodized aluminum construction
-All ZEV triggers include our NEW PRO connector

INCLUDED COMPONENTS:
-ZEV PRO Flat Faced Riveted Trigger
-ZEV Trigger Bar
-ZEV PRO Connectdor
-ZEV Firing Pin Safety
-ZEV Skeletonized Striker
-ZEV Firing Pin Safety Spring
-ZEV PRO Striker Spring
-ZEV Trigger Spring
-Ejector Housing

COMPATIBILITY:
Glock 17 (4th Gen)
Glock 19 (4th Gen)
Glock 26 (4th Gen)
Glock 34 (4th Gen)

Over the years, our triggers have won more world championships and are in the hands of more professionals than all other after-market triggers, combined.

We didn’t stop there, beginning two years ago we set out to reinvent our entire product line. After thousands of hours of design and engineering and after hundreds of thousands of rounds of testing, we are proud to announce a product line built from the ground up to perform better and more reliably than anything else on the market.

At the core of our PRO Flat Face trigger is ZEV’s new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market.

Features

416R gun barrel quality stainless steel
Match grade drop in barrel
Final dimension of +/- 0.0002″ for unmatched accuracy
Fits Glock Gen3, Gen4, Gen5

ZEV Technologies -Basepad for Glock Magazine
Spawned from engineering talks during the Magpul modeled Glock® magazine basepad development, we decided to round out the ZEV Technologies catalog of innovative products with an extended base pad for the standard capacity 17round Glock® handgun magazine.

Zev’s 3-piece design is easy to reassemble onto the magazine, and can be easily disassembled for cleaning without losing any parts

Zev Technologies and The Sporting Jack will not ship any of these items to individuals living within the state of California.

Kit contents:

Basepad assembly (3 piece)
• Basepad baseplate
• Extra power magazine spring

Technical specs:
• Adds +5 capacity on 9mm
• Adds +4 capacity on .40 cal
• Fits standard capacity Glock 9mm & .40 magazines
• Additional power spring provided
• Available in Red and Black anodized aluminum
Applications:

*
1st-3rd Gen

** Glock 17C
** Glock 17L
** Glock 22
** Glock 22C
** Glock 24
** Glock 24C
** Glock 31
** Glock 31C
** Glock 34
** Glock 35

*
4th Gen

** Glock 17
** Glock 22
** Glock 31
** Glock 34
** Glock 35

All Products are made in the USA by Americans.

Should you have any questions or issues with your new product please contact me.

It is my goal to make my customers 100% satisfied with their purchase. I will go the extra mile.

Thank you for your business-Dave Kravetz

The Sporting Jack Outfitters a

Service-Disabled Veteran-Owned Business

MADE IN COLLABORATION WITH SIG SAUER

ZEV Technologies PRO Barrels offer a streamlined hood design that incorporates the ZEV logo slashes and caliber marking.

Zev Technologies» Match Grade drop-in Sig replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

ZEV Technologies -Basepad for Glock Magazine
Spawned from engineering talks during the Magpul modeled Glock® magazine basepad development, we decided to round out the ZEV Technologies catalog of innovative products with an extended base pad for the standard capacity 17round Glock® handgun magazine.

Zev’s 3-piece design is easy to reassemble onto the magazine, and can be easily disassembled for cleaning without losing any parts

Zev Technologies and The Sporting Jack will not ship any of these items to individuals living within the state of California.

Kit contents:

Basepad assembly (3 piece)
• Basepad baseplate
• Extra power magazine spring

Technical specs:
• Adds +5 capacity on 9mm
• Adds +4 capacity on .40 cal
• Fits standard capacity Glock 9mm & .40 magazines
• Additional power spring provided
• Available in Red and Black anodized aluminum
Applications:

*
1st-3rd Gen

** Glock 17C
** Glock 17L
** Glock 22
** Glock 22C
** Glock 24
** Glock 24C
** Glock 31
** Glock 31C
** Glock 34
** Glock 35

*
4th Gen

** Glock 17
** Glock 22
** Glock 31
** Glock 34
** Glock 35

All Products are made in the USA by Americans.

Should you have any questions or issues with your new product please contact me.

It is my goal to make my customers 100% satisfied with their purchase. I will go the extra mile.

Thank you for your business-Dave Kravetz

The Sporting Jack Outfitters a

Service-Disabled Veteran-Owned Business

The PRO barrel line features extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.

ZEV PRO barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

The barrels are cut rifled and 100% inspected for groove dimensions and broach finish. Available standard and threaded with 1/2 x 28 suppressor threading for Glock 19 and Glock 17.

SPECS – US/METRIC
Material- 416R Stainless
Finish- PVD Bronze
Twist Rate-1-10″
Tolerance -+/- 0.003″

TECHNICAL SPECS
Match Grade drop in barrel
1-10″ twist rate
SAAMI spec. Match chambers

ZEV PRO barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

The barrels are cut rifled and 100% inspected for groove dimensions and broach finish. Available standard and threaded with 1/2 x 28 suppressor threading for Glock 19 and Glock 17.

ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.003″ for consistency and accuracy.

The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.

Available finishes:
Raw Stainless Steel
Black DLC (Diamond-Like Carbon)
Burnt Bronze

ZEV Technologies -Basepad for Glock Magazine
Spawned from engineering talks during the Magpul modeled Glock® magazine basepad development, we decided to round out the ZEV Technologies catalog of innovative products with an extended base pad for the standard capacity 17round Glock® handgun magazine.

Zev’s 3-piece design is easy to reassemble onto the magazine, and can be easily disassembled for cleaning without losing any parts

Zev Technologies and The Sporting Jack will not ship any of these items to individuals living within the state of California.

Kit contents:

Basepad assembly (3 piece)
• Basepad baseplate
• Extra power magazine spring

Technical specs:
• Adds +5 capacity on 9mm
• Adds +4 capacity on .40 cal
• Fits standard capacity Glock 9mm & .40 magazines
• Additional power spring provided
• Available in Red and Black anodized aluminum
Applications:

*
1st-3rd Gen

** Glock 17C
** Glock 17L
** Glock 22
** Glock 22C
** Glock 24
** Glock 24C
** Glock 31
** Glock 31C
** Glock 34
** Glock 35

*
4th Gen

** Glock 17
** Glock 22
** Glock 31
** Glock 34
** Glock 35

All Products are made in the USA by Americans.

Should you have any questions or issues with your new product please contact me.

It is my goal to make my customers 100% satisfied with their purchase. I will go the extra mile.

Thank you for your business-Dave Kravetz

The Sporting Jack Outfitters a

Service-Disabled Veteran-Owned Business

Model: COMP-PRO-V2-B

Fits: Glock 17 / 19 / 34 (9mm)

Brand new & factory sealed

– The ZEV V2 PRO Compensator was designed to enhance the performanceof your Glock pistol by reducing muzzle rise and felt recoil. The V2 improves upon the original PRO Compensator with contoured porting, an enlarged guide rod channel, and a new mounting system which permits secure installation and removal without the need for thread locking compound.The ZEV V2 PRO Compensator was developed and optimized for use on the G19 but will fit and function on all 9mm Glock models with a corresponding threaded barrel. Due to its compact size, when installed on a G19 with ZEV threaded barrel, it has the same overall length as a G34 slide and is compatible with most G34 holsters.The ZEV V2 PRO Compensator Gen5 version is designed to mesh with the contoured nose of Glock and ZEV Gen5 slides.The V2 PRO Compensator will generally function with standard power 9mm ammunition and factory recoil assemblies but best performance will be obtained through matching the recoil spring weight to your particular pistol and ammunition.

Technical Specs
Contoured porting
Enlarged guide rod channel
Improved mounting system

Product Description:

The PRO compensator was designed specifically for the G19 but will fit and function on other 9mm Glock models and will generally cycle with standard 9mm ammunition without any modification to the guide rod or recoil spring. Due to it’s compact design, when installed on a G19 with a ZEV threaded barrel, it has the same overall length as a G34 slide and is compatible with most G34 Holsters.

100% Made in the USA

The ZEV extended magazine release enables shooters to easily depress it and drop a magazine from their firearm without shifting their firing grip.

TECHNICAL SPECS
Compatible with all X Series grips, M17/M18 grips,and Gen1 P320 grip
Does not include spring or stopper. Reuse factory parts to install

NOTE: GLOCK magazine not included. Not compatible with restricted capacity GLOCK magazines
TECHNICAL SPECS
Adds +5 capacity on 9mm
Adds +4 capacity on .40 cal
Fits standard capacity GLOCK 9mm & .40 magazines
3-piece design is easy to reassemble without damaging the mag body
Additional power spring provided
ZEV Technologies© will not ship any of these items to individuals living within the state of California.

COMPATIBILITY
Glock 17 (4th Gen)
Glock 17 (5th Gen)
Glock 17C (1st – 3rd Gen)
Glock 17L (1st – 3rd Gen)
Glock 22 (1st – 3rd Gen)
Glock 22 (4th Gen)
Glock 22 (5th Gen)
Glock 22C (1st – 3rd Gen)
Glock 24 (1st – 3rd Gen)
Glock 24C (1st – 3rd Gen)
Glock 31 (1st – 3rd Gen)
Glock 31 (4th Gen)
Glock 31C (1st – 3rd Gen)
Glock 34 (1st – 3rd Gen)
Glock 34 (4th Gen)
Glock 34 (5th Gen)
Glock 35 (1st – 3rd Gen)
Glock 35 (4th Gen)