EGW Savage Long Action Picatinny Rail Scope Mount Round Back 20MOA

$3999

4 in stock

SKU: 41102 Category: Product ID: 6549

Description

Description
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 4.630″
Overall Length: 7.458″

Custom 30 or 40 MOA is available. Please allow for a 3 week lead time for custom MOAs.

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount does NOT fit the 212
The 212 mount is available here Our Savage bases will work with any long action round back Savage rifle with an ejection port. It is also compatible with the Stevens Long actions.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

This mount is available in 0 or 20 MOA.

We recommend:
0 MOA – if shooting 0-500 yards
20 MOA – if shooting 500-1000 yards

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 3 weeks & you will need to contact EGW to place your order over the phone.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.

EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul! Available in matte black and silver.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Evolution Gun Works

HD Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

EGW 1-Piece Picatinny-Style Base Savage 110 Through 116 Round Rear Long Action

Description

Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Center Spread: 4.63″
Overall Length of Mount: 7.458″

Our HD Savage bases will work with any long action round back Savage rifle.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately). Our mount is drilled for and provided with 6-48 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 3 weeks & you will need to contact EGW to place your order over the phone.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

These bases sit at approximately 0.35″ high.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002″.

After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.

We recommend:
0 MOA – if shooting 0-500 yards
20 MOA – if shooting 500-1000 yards

Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package!

From manufacturing to packaging, EGW’s products are made with pride in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Money Back Guarantee is included!

All Products are made in the USA by Americans.

Should you have any questions or issues with your new product please contact me.
It is my goal to make my customers 100% satisfied with their purchase.
I will go the extra mile.
Thank you for your business-Dave Kravetz
The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business

Additional information

Weight 4.0 oz
Dimensions 10.0 × 6.0 × 1.0 in

The Sporting Jack. All rights reserved 2022.

The Sporting Jack. All rights reserved 2022.