Shop – The Sporting Jack

EGW Winchester XPR Long Action Tactical Scope Mount 0MOA – 42600

thesportingjack — Mon, 12 May 2025 13:51:55 +0000

Winchester XPR Long Action Picatinny Rail Scope Mount 0 MOA Ambidextrous

Description

Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: Hex head screws and wrench provided
Center Spread: 3.862″
Overall Length: 7.064″

This mount is designed specifically for the XPR long action receiver. It will NOT fit any other model 70.

The middle spread is the distance between the two middle holes, center to center, on your receiver.

These mounts are available in 0 or 20 MOA.

We recommend:
0 MOA – if shooting 0-500 yards
20 MOA – if shooting 500-1000 yards

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

Available in matte black. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Please give us a call if you’d like to place a custom order).

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Money Back Guarantee is included!

All Products are made in the USA by Americans.

Should you have any questions or issues with your new product please contact me.
It is my goal to make my customers 100% satisfied with their purchase. I will go the extra mile.
Thank you for your business-Dave Kravetz
The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business

Factory Remington 700 Long Trigger Guard Screws Stainless Steel Meant to be cut

thesportingjack — Fri, 14 Mar 2025 18:17:27 +0000

Factory Remington 700 Long Trigger Guard Screws

Replaces worn or damaged trigger guard screws

Blued for durability and corrosion resistance

Hex head for easy installation and easy to cut to length

Fits all Remington 700 rifles with long trigger guards can be cut down

Includes two screws

Don't wait until your trigger guard screws are so worn that they fall out! Replace them today with these genuine Remington factory screws. Made of stainless steel for durability and corrosion resistance, these screws are easy to install with their hex head design. Fits all Remington 700 rifles with long trigger guards. Includes two screws.

Keywords: Remington 700, trigger guard screws, long trigger guard, factory screws, stainless steel, hex head, gun parts, rifle accessories, replacement screws, worn screws, damaged screws, durable, corrosion resistant, easy to install, fits all Remington 700 rifles with long trigger guards, includes two screws

Trijicon RMR / SRO, Holosun 507c Sight Red Dot Scope Mount for Novak

thesportingjack — Tue, 05 Nov 2024 18:07:53 +0000

Mounting Hardware is Included

This mount fits (including but not limited to):
Firearms with a traditional Novak cut rear sight.

Please note, some manufacturers use licensed Novak rear sights. These are cut to the manufacturer’s spec and are NOT GENUINE/traditional/true Novak rear sight cuts. One of the most common manufacturers to do this is Taurus. Ruger also uses smaller Novak rear sights on their fixed sight revolvers. Our mount will NOT fit these applications since they are not a traditional/true Novak cut. We do not offer any options for those applications. Please refer to Novak’s site and/or call the manufacturer of your firearm to confirm that you have a GENUINE Novak cut, not a licensed Novak cut.

Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dot

Mounting Hardware is Included

This mount fits (including but not limited to): 1911s with Novak style rear sight cut (please see below for a comprehensive list)

CZ 75 Bull Shadow

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. Our products should be installed and checked by a qualified and competent gunsmith.

Installation Instructions
– Remove the rear sight*
– Install the EGW Sight Mount in the dovetail
– Tighten set screw (if applicable)
– Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
– Apply blue Loctite to the provided mounting screws
– Torque mounting screws to 15in/lbs

2 Flat Head Cap Screws – Provided for Trijicon RMR

The screws that are included with this mount require a 5/64” allen wrench for installation.

This mount fits (including but not limited to):
CZ 75 Bull Shadow
STI with fixed rear sights
STI Marauder
Christensen Arms 1911
Colt Delta Elite 10mm (2016 and newer)
Ruger SR 1911 (fixed rear sight)
Sig Sauer Nightmare
Citadel 1911s
Springfield Armory 1911 EMP – 9mm / .40
Springfield Armory 1911 EMP 4″ Lightweight Champion – 9mm / .40
Springfield Armory 1911 EMP 4″ Conceald Carry Contour Model – 9mm / .40
Springfield Armory 1911 Champion Operator Lightweight – .45
Springfield Armory 1911 Range Officer Compact – 9mm / .45
Springfield Armory 1911 Range Officer Champion – 9mm / .45
Springfield Armory 1911 Range Officer Elite Compact – 9mm / .45
Springfield Armory 1911 Range Officer Elite Champion – 9mm / .45
Springfield Armory 1911 Range Officer Elite Operator – 9mm / .45
Springfield Armory 1911 Loaded (Fixed Rear Sight) – .45
Springfield Armory 1911 TRP
Rock Island TCM Rock Standard MS HC Combo – 22TCM/9MMTCM
Rock Island TAC Ultra FS Combo – 22TCM/9MMTCM
Rock Island Rock Ultra FS Combo – 22TCM/9MMTCM
Rock Island TAC Ultra FS HC Combo – 22TCM/9MMTCM
Rock Island TAC Ultra MS HC Combo – 22TCM/9MMROCK
Rock Island Ultra CS-LTCM Rock Standard FS HC Combo – 22TCM/9MMROCK
Rock Island Ultra CCO
Rock Island TAC Ultra FS HC – 45 ACP
Rock Island TAC Standard FS – 45 ACP
Rock Island TAC Ultra FS HC – 9MM
Rock Island TAC Ultra FS – 45 ACP
Rock Island TAC Ultra CS – 45 ACP
Rock Island TAC Ultra CS – 9MM
Rock Island TAC Ultra FS – 10MM
Rock Island TAC Ultra MS – 10MM
Rock Island Rock Standard FS – 45ACP
Rock Island M1911-A1 FS Tac
Rock Island Rock Ultra CS – 45 ACP
Rock Island Rock Ultra CS-L
Rock Island Rock Standard MS – 45ACP
Rock Island Rock Ultra CCO
Rock Island Rock Standard FS – 9MM
Rock Island Rock Standard CS – 45 ACP
Rock Island Rock Ultra FS – 9MM
Rock Island Rock Ultra FS – 10MM
Rock Island Rock Standard FS 2-TONE – 45 ACP
Rock Island Rock Ultra MS – 10MM
Rock Island Rock Standard FS MATTE NICKEL – 45 ACP
Rock Island Rock Ultra FS – 40 S&W
Rock Island Rock Ultra FS – 45 ACP
Rock Island Rock Ultra FS HC – 10MM
Rock Island Rock Ultra MS – 45 ACP
ATI GSG 1911 .22
ATI GSG 1911 Target
ATI GSG 1911 HGA
ATI GSG 1911 CA Compliant
ATI GSG 1911 ADOP
Iver Johnson Hawk 45 Matte
Iver Johnson Hawk 45 Matt NS
Iver Johnson Hawk 9 Matte
Iver Johnson 9 Matte NS
Iver Johnson Hawk Polished
Iver Johnson Hawk Polished NS
Iver Johnson Thrasher Polished 45
Iver Johnson Thrasher Polished 45 NS
Iver Johnson Thrasher Polished 9
Iver Johnson Thrasher Polished 9 NS
Iver Johnson Thrasher Polished 40
Iver Johnson Thrasher Polished 40 NS
Iver Johnson Thrasher CHR45
Iver Johnson Thrasher CHR45 NS
Iver Johnson Thrasher CHR9
Iver Johnson Thrasher CHR9 NS
Iver Johnson Hawk Digital Navy NS
Iver Johnson Hawk O.D. Green
Iver Johnson Hawk O.D. Green NS
Iver Johnson Hawk Coyote Tan
Iver Johnson Hawk Coyote Tan NS
Iver Johnson Thrasher SS 45
Iver Johnson Thrasher SS 45 NS
Iver Johnson Thrasher SS 9
Wilson Combat Supergrade Commander Special
Wilson Combat Tactical Carry Compact
Wilson Combat Tactical Supergrade
Wilson Combat Tactical Supergrade Compact
Wilson Combat Tactical Supergrade Professional
Wilson Combat Tactical Carry
Wilson Combat Tactical Carry Professional
Wilson Combat Tactical Elite
Wilson Combat Vickers Elite
Wilson Combat Vickers Elite Commander
Wilson Combat X-Tac
Wilson Combat X-Tac Compact
Wilson Combat X-Tac Elite
Wilson Combat X-Tac Elite Carry Comp Pro
Wilson Combat X-Tac Elite Professional
Wilson Combat X-Tac Professional
Wilson Combat X-Tac Elite Compact
Wilson Combat X-Tac Elite Carry Comp
Wilson Combat Protector
Wilson Combat CQB
Wilson Combat CQB Elite
Wilson Combat CQB Tactical LE
Wilson Combat CQB Light-Rail Lightweight
Wilson Combat Ultralight Carry
Wilson Combat Ultralight Carry Commander
Wilson Combat Ultralight Carry Professional
Wilson Combat Ultralight Carry Compact
Wilson Combat Ultralight Carry Sentinel
Wilson Combat ULC Commander Compact
Wilson Combat Carry Comp
Wilson Combat Carry Comp Professional
Wilson Combat Hackathorn Special
Wilson Combat Hackathorn Special Commander
Wilson Combat Tactical Elite
Wilson Combat EDC X9
Wilson Combat EDC 9 Compact
Wilson Combat EDC 9 Professional
Wilson Combat Protect Professional
Wilson Combat Elite Professional
Wilson Combat Professional
Wilson Combat Professional Lightweight
Wilson Combat Professional LR-LW
Wilson Combat Bill Wilson Carry
Wilson Combat Protector Compact
Wilson Combat CQB Compact
Wilson Combat CQB LR-LW Compact
Wilson Combat CQB Commander
Wilson Combat CQB Commander Compact
Wilson Combat Sentinel Compact
Wilson Combat Stealth
Wilson Combat MS Sentinel
Wilson Combat Sentinel
Wilson Combat Sentinel Compact
Wilson Combat Sentinel Professional
Wilson Combat Super Sentinel
Wilson Combat Sentinel XL

Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.

This mount does not fit (including but not limited to):
Ruger 5.7

B&T Industries Standard Height Accu-Shot Monopod BT12-QK: Precision Rail Monopod

thesportingjack — Fri, 20 Jan 2023 00:25:32 +0000

The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. NSN 1005-01-678-1553

Elevation Range: 3.75 – 4.65″
Folded Length: 3.85″ approximate
Weight: 7.4 ounces

MORE INFO: QK02 – QUICK KNOB –
The Quick Knob (QK01) allows quick, gross adjustments into the target with a push of a button! The Knob has a spring loaded button that when depressed allows the operator to slide the knob up or down on the Actuator Rod quickly into the desired sight picture. When the button is released, the fine threads are re-engaged and the operator can make the final adjustments by rotating the Knob.

*The Sporting Jack is an Authorized B&T Industries Dealer.

Taran Tactical Base Pad Kit for Glock 43+2 – Gold

thesportingjack — Tue, 10 Jan 2023 04:08:33 +0000

Taran Tactical Base Pad Kit for Glock 43+2 – Gold

*Remove the metal insert at the bottom before installation*

*Does not work with grip plug*

*Product will not be compatible with Glock 43X or 48 firearms*

– This base pad comes with a 10% stronger spring.

– Overall weight 1oz.

– Length, 1 inch front side, half Inch on back side.

– Patented proven push pin design.

– Easily attaches and detaches from the magazine.

– No specialty tools or devices required to disassemble.

– One piece design, no extra parts to possibly lose during disassembly.

– Designed specifically for the GLOCK 43.

– +2 Holds 8 +1 rounds in 9mm.

– CNC machined from billet aluminum.

– Hard Anodized.

– Made in the USA.

This Taran Tactical Innovations GLOCK base pad is designed for the GLOCK 43. This TTI base pad adds 2 extra rounds to the magazine. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning of your magazine. Just push down the pin, slide the base pad on and push the pin up to lock it onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Taran Tactical Base Pad for Glock 43 +2 Base Pad All Colors

thesportingjack — Tue, 10 Jan 2023 04:05:58 +0000

Taran Tactical Base Pad for Glock 43 +2 *Remove the metal insert at the bottom before installation* *Does not come with an allen key. Because the screws are set with Loc-tite to achieve a nice tension with the pin. Stripping the screw voids the warranty. * This product will ONLY work on Glock 43! TTI Firepower Base Pad Kit for GLOCK. The added weight helps the magazine drop free easily for faster reloads. – CNC machined from billet aluminum. – Hard Anodized. – Made in the USA. – Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler. The Taran Tactical Innovations GLOCK base pad works on GLOCK 43 Models. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Taran Tactical Innovations TTI Ultimate Fiber Optic Sights Set for Glock with Optic Cut

thesportingjack — Tue, 10 Jan 2023 04:04:24 +0000

TTI Ultimate Fiber Optic Sights Set for Glock with Optic Cut

*Please Note : Fiber Optic does NOT come installed on the front sight*

– Made for double stack Glocks.

– 1/16 allen key.

-Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use. Take your pick between our standard height and our co-witness height!

-RMR Co-Witness option is for Glock slides that have gotten the RMR cut, like the one we provide. This is not for MOS Glock slides.

– POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

– The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

– The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it – Which can cause the shooter to shoot either too high or too low.

– The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

– Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

– As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.

– The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.

– All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.

Standard Height Specs

– The front sight is .230″ tall and .124″ wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

– The rear is .245″ tall. The tighter .125″ rear notch helps dramatically when shooting small steel and tight shots at a distance.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

Taran Tactical for Glock Fiber Optic Sight Set Co-witness, MOS Cut

thesportingjack — Tue, 10 Jan 2023 04:02:17 +0000